Modular Pump Drives
Durst Pump Drives is a leading modular design hydraulic pump drive solution that can be easily configured to meet your application needs. This revolutionary design features AGMA Class 10 gearing and is precision manufactured for lower operating temperatures and increased life.
- AGMA Class 10 Spur Gearing.
- One Piece Gear and Shaft Design.
- Patented Wet Spline Connection eliminates “dry start” conditions.
The patented pump pad design keeps oil constantly flowing through the bearing and provides for wet spline operation, even at startup. All Durst Pump Drives incorporate class 10 spur gears that run on heavy-duty ball bearings. They also feature an internal spline, which, with a spline adaptor, is compatible with any SAE pump shaft and offer quieter operation.
Our responsive Technical Sales team can help design a DURST modular design to fit a wide range of custom applications.
PUMP PADS
The Durst Pump Drives Pads do not contain bearing cups. The advantage of this approach is that pump pads can be removed without disrupting the internal workings and alignment of the bearings and gears inside the gearbox.
DRIVE PLATES
The Durst Pump Drives now use a four-disk drive plate. By using four thin disks, the drive plate becomes slightly wider and increases the rating. Thin disks are much more flexible. When put together, multiple disks absorb more engine vibrations than a single thick disk. The drive plate is no longer captured on the input shaft; instead, it is able to automatically adjust if any engine flywheel misalignment occurs, resulting in smoother operation and longer gearbox life.
HEAVY DUTY BALL BEARINGS
The heavy-duty ball bearings placed directly in the housing halves don’t require shimming, which drastically simplifies assembly. Any adapter can be easily attached without disturbing the gears or bearings in the gearbox. The gearbox can easily be split for servicing without removing the adapters.
SPLINES
The Durst Pump Drives has a 29T-12/24 internal spline on the gears, allowing a spline adapter to be used on any SAE pump shaft. Since the pump shaft mating spline is not integral to the output gear, the mating pump shaft spline adapter can be replaced without the need to remove or replace the output gear. Plus the 29T-12/24 spline significantly reduces wear on both gears and spline adapters.
OIL CIRCULATION
The Durst Pump Drives features special oil port locations and oil directing ribs that cause the oil to flow into the pump pad area, lubricating the spline adapters and bearings without the need for external pumps. Oil flows into the pump pad area, and then our patented cast-in recesses causes the oil to flow across the spline for wet spline operation.
INPUT SHAFT
The Durst Pump Drives input shaft engages the input gear through a 29T-12/24 spline. The input shaft is retained within the gearbox and allows the drive plate or torsional coupling hub to ride free on the input shaft, reducing misalignment stresses from the engine flywheel and the gearbox. It can be removed or replaced without disturbing the internal workings of the gearbox.
Features
- Quick Ship – Modified Standards.
- Patented Modular Design.
- Compact Package Size.
- Cast Iron Housing.
- AGMA Class 10 Gearing.
- One-Piece Gear and Shaft Design.
- Wide Range of Ratios.
- Patented Wet Spline Connection; Patent No. 7,152,711.
- Drop-in Replacement for Most Applications.
- Pump Pads and Spline Adapters.
- Available in SAE and DIN Standard.
- Overhung Load Adapters.
- Oil Circulation Systems.
Applications
- Construction
- Agricultural
- Offshore Oil
- Forestry
- Marine Decking
- Material Handling
- Railway Maintenance