• TECHNODRIVE Hydraulic pump drives

TECHNODRIVE Hydraulic pump drives

The modular design of these pump drives enables you to choose from several input options, including a rubber block drive, or clutch to match your SAE engine flywheel dimensions. Independent mounting is also an option, both direct and with a clutch.

For your pump mounting requirements, Twin Disc offers standard SAE adaptor kits as well as a wide variety of non-SAE adaptations for your special needs.

With models having one, two, three, four or six pump pads, Twin Disc is sure to have a pump drive to complement your hydraulic application. For your convenience, the number of pump pads is indicated by the first numeral after the "AM" designation in the pump drive model numbers. Models AM 232, AM 365, AM 450, and AM 480 also have additional pump pads available on the input side of the pump drives.

 

Features

  • Cast iron housings
  • Case hardened and ground spur gears, shaved on AM216/320
  • Ball bearings
  • Case hardened shafts
  • Viton seals on input shaft
  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs
  • Maximum input torque based on theoretically unlimited gear life and a minimum L10 bearing life of 10,000 hours.
  • Oil Circulation Systems.

 

Applications 

  • Construction
  • Agricultural
  • Offshore Oil
  • Forestry
  • Marine Decking
  • Material Handling
  • Railway Maintenance

Twin Disc Technodrive AM216 Pump Drive
 

Maximum Input Power 205 kW (275 hp)
1:1 ratio @ 3200 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM220 Pump Drive
 

Maximum Input Power 355 kW (476 hp)
1:1 ratio @ 3200 rpm  

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM230 Pump Drive
  

Maximum Input Power 430 kW (577 hp)
1:1 ratio @ 2600 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM232 Pump Drive

 

Maximum Input Power 565 kW (758 hp)
1:1 ratio @ 2400 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM320 Pump Drive

  

Maximum Input Power 205 kW (275 hp)
1:1 ratio @ 3200 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM330 Pump Drive

 

Maximum Input Power 355 kW (476 hp)
1:1 ratio @ 3200 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM345 Pump Drive

 

Maximum Input Power 430 kW (577 hp)
1:1 ratio @ 2600 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

 

Twin Disc Technodrive AM365 Pump Drive

 

Maximum Input Power 670 kW (899 hp)
1:1 ratio @ 2200 rpm 

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

Twin Disc Technodrive AM450 Pump Drive

 

Maximum Input Power 640 kW (858 hp)
1:1 ratio @ 2400 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all outputs

 

Twin Disc Technodrive AM480 Pump Drive

 

Maximum Input Power 700 kW (939 hp)
1:1 ratio @ 1800 rpm

  • Output rotation opposite the direction of input rotation
  • Gear ratios identical on all output

 

We are specialists in the manufacture & servicing of Power Transmission and Heat Transfer products.

We offer solutions from minor repairs through to complete overhauls.

Contact us for a quote
Products to compare:
Comparing Products